72 replies to this topic

[Audrius ÄŒesonis]

So i can turn up and maybe will work? But does it actually works on this type o civic? Or problably just get k tuned tps and thats all.

[BB Baboonface]

The K Tuned sensor has a good reputation over all, looks good too! 

 

Trying to find information on the CRV sensor and its compatibility but came up with nothing, it is obviously mounted on the other side of the TB but that is all i could see.

No part numbers as Honda do not sell them separate to the throttle body, also, most information on K Series comes from the US, and the CRV only came with a K24 over there.

[Audrius ÄŒesonis]

Thats 100% true. I was reading some of that and called today to dealer, its doesnt suit for civic at all. Got a price from Canda and its expencisve for that small part is 150 pounds.. 

Do you know any think about this sensor :

Blackworks Throttle Position Sensor

Its looks like its like OEM or not? 

[BB Baboonface]

Heard of the Blackworks sensors failing pretty quickly, maybe the K-Tuned would be worth the cost rather than buying twice?

 

Some good reading here, not all good news, there does not seem to be a truly reliable solution, but may help you figure out where you want to go next:

http://www.k20a.org/...ead.php?t=69154

[Audrius ÄŒesonis]

Thanks man a lot but here today I ordered its seems are much better and seller sad will be no problem for long.
K tuned hall effect

Attached Files

•  image.jpg   18.71K   1 downloads

[BB Baboonface]

Hey nice job man! 

 

Let us know how it goes.

[Audrius ÄŒesonis]

I will after one week

[Audrius ÄŒesonis]

Ok here what I got finally
 image.jpg   207.88K   1 downloads

Had a problem with readings again, try to set up fof 0.5 and 4,5 but could. Smallest was 0.52 and open was around 3 just. Try to drive and was like shooting down the engine then little pushing acceleration, so was very bed. But set up tps around in middle and reading are like this
 image.jpg   189.38K   2 downloads
 image.jpg   285.33K   1 downloads

But after this readings my car is going with no problems everything is gone. So does any one knows is that ok those reads? If no whats could be problem?

[Audrius ÄŒesonis]

And as well, does it going to do any damage to engine if i will drive like that? Or is going to do any think bed to car? More fuel taking maybe??

[BB Baboonface]

Well man, glad to hear your car is driving okay, as for whether there may be problems with the settings you have i do not know.

 

Are you planning to go ahead with engine modifications soon?

If so, then get K-Pro and a remap, more power even on a stock car, on board diagnostics, and you can even calibrate the TPS with it!

 

I know that is a dumb, unhelpful, and expensive suggestion, but it just seems more helpful than saying "i dont know" and leaving you with nothing.

The previous owner looks like he used a Blox TPS with weedy wiring that breaks very easily, and i guess that has caused at least some of these problems you have suffered.

 

Apologies for not being of more help to you buddy.

[Audrius ÄŒesonis]

Yes i am planing to get k pro as well but not now, its a little bit expensive. Need save some money and get after. Do you know any different between k pro and k pro3??

But thanks a lot for all you comments and help for me man if i would be living close to you would give you big hand shack

[BB Baboonface]

If i have helped at all, then that makes me a happy bunny! haha!

 

As for K-Pro 3, i believe it is an updated version that has better connectivity and faster operation time, plus a few extra features for security and mapping etc.

[Audrius ÄŒesonis]

You help me a lot. If not you i would be still looking for problem. 

So thats mean its good, need save some money and buy it