Anyone have the valve clearance specs for the ep2 civic. (1.6 engine).
Thanks
valve clearance specs
Started by
btcc_civic
, Jan 24 2010 03:06 PM
5 replies to this topic
#1
OFFLINE
btcc_civic
-
- Standard Member
- 15 posts
Newbie
Posted 24 January 2010 - 03:06 PM
Hi all,
Anyone have the valve clearance specs for the ep2 civic. (1.6 engine).
Thanks
Anyone have the valve clearance specs for the ep2 civic. (1.6 engine).
Thanks
#3
OFFLINE
ashg
-
- Standard Member
-
- 134 posts
Experienced Member
- Locationcannock
Posted 26 January 2010 - 06:30 PM
9 thou inlet 11 thou exhaust
#4
OFFLINE
Remould
-
- Standard Member
-
- 3032 posts
Legend
- LocationSurrey
Posted 27 January 2010 - 12:52 AM
D16V1 Valve Clearances (cold):
Intake = 0.18mm - 0.22mm (0.007in to 0.009in)
Exhaust = 0.23mm to 0.27mm (0.009 to 0.011in)
Data kindly provided by the Haynes owners workshop manual (available at Halfords etc)...
Intake = 0.18mm - 0.22mm (0.007in to 0.009in)
Exhaust = 0.23mm to 0.27mm (0.009 to 0.011in)
Data kindly provided by the Haynes owners workshop manual (available at Halfords etc)...
#5
OFFLINE
martinj46
-
- Standard Member
-
- 1302 posts
Veteran Member
- LocationAberdeen
Posted 27 January 2010 - 09:18 AM
Data kindly provided by the Haynes owners workshop manual (available at Halfords etc)...
If only more people bought one. I never thought I'd get much use out of it, but I have used mine several times!
#6
OFFLINE
Zoz
-
- Standard Member
-
- 357 posts
Established Member
- LocationBudapest
Posted 28 March 2014 - 03:41 PM
What about Crower Stage 1 Cams?
Crower says
intake: .006
exhaust: .008
But this is for D17A2. Should I use it these clearances for my Ep2?
Also is it hot or cold?
If hot, what is "hot"? Should I warm up the engine, shut it off, and make the adjustment fast as hell, or what? 
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
